Browse Business Software Categories

Close  

Distribution

ERP

Inventory Management

Acumatica Kits: Setting Up Kit Specifications and Assembly

Acumatica Kits: Setting Up Kit Specifications and Assembly

Last updated: November 8, 2026 · Independent guide · We do not sell rankings or coverage.

Acumatica kitting runs on four pieces: the Kit Assembly feature, a kit item flagged with the Is a Kit check box, a kit specification that lists the components, and, for stock kits only, a kit assembly document that consumes components and adds finished kits to inventory. A stock kit is built ahead of time and counted like any other item, while a non-stock kit is sold as one line and its stock components are relieved at shipment. This guide takes an administrator through each setup step, shows how Acumatica costs each kit type, and explains when to move to Manufacturing Edition.

For the concepts behind virtual, pre-built and bill-of-materials kitting, see our guide to kitting in inventory management.

Before you start

  • Edition and license. Acumatica’s Distribution Edition datasheet (version 20250923) lists “Kitting and Disassembly” among its inventory features, including the ability to “build kits to stock or to order.” Confirm with your partner that inventory management is on your subscription. Our Acumatica pricing guide explains how editions and tiers affect the fee.
  • Feature. Kit Assembly must be enabled on the Enable/Disable Features (CS100000) form.
  • Item master. Every component must already exist as a stock or non-stock item, and you need an item class whose defaults suit a kit. Our Acumatica inventory management setup guide covers item classes, valuation methods and lot and serial classes.
  • Planning (optional). For planning to create component demand from kits, you also need MRP or DRP, per the 2024 R1 release notes.

Form names, IDs and field labels below come from the MYOB Acumatica user guide, which documents the same platform. It gives no menu paths for these forms, but you can open each one by typing its form ID in the Search box.

Step 1: Enable the Kit Assembly feature

Open Enable/Disable Features (CS100000) and turn on Kit Assembly.

Step 2: Create an assembly and disassembly reason code

Assembly and disassembly can create cost variances, which Acumatica records against a reason code of the Assembly/Disassembly type. Create one on Reason Codes (CS211000), then set it as the default Assembly/Disassembly Reason Code on Inventory Preferences (IN101000).

A reason code is required on assembly when a component line exceeds on-hand quantity and the item class allows negative quantities, and on every disassembly to record the difference between kit cost and component cost.

Step 3: Decide stock kit or non-stock kit

Behavior Stock kit Non-stock kit
Tracked in inventory Yes, with its own on-hand quantity No; only stock components are tracked
Components leave stock When the kit is assembled When the kit ships
Assembly and disassembly documents Required Not used
Specification revisions Multiple One
Valuation method Average, FIFO, Specific or Standard Standard only
Sales returns As a kit unit As a kit unit or any component

Choose a stock kit when building takes real labor or packaging, when the kit needs its own lot or serial number, or when it must ship as fast as a single item. Choose a non-stock kit when components also sell on their own and you want one shared pool of stock.

Step 4: Create the kit item

For a stock kit, open Stock Items (IN202500), add a record, select an item class in the Item Defaults section of the General tab and select Is a Kit. Acumatica says to “make sure that default settings copied from the item class are applicable to the stock kit,” so check the valuation method, lot or serial class and posting class before saving.

For a non-stock kit, open Non-Stock Items (IN202000), add the item and select Is a Kit. Only Standard valuation applies, so enter the kit’s standard cost in the Pending Cost box on the Price/Cost tab if you will use it in Step 6.

Step 5: Build the kit specification

Open Kit Specifications (IN209500), select the kit in Kit Inventory ID, enter a Revision that is unique for that kit and confirm Active is selected. Select Allow Component Addition only if users may add unlisted components during assembly or shipping; it does not let them change quantities.

On the Stock Components tab, add each item with its UOM and Component Qty. Optional columns control flexibility:

  • Allow Component Qty. Variance, with minimum and maximum quantities.
  • Disassembly Coeff., a value from 0 to 1 for how much of the component returns to stock on disassembly. Use less than 1 for consumables.
  • Allow Component Substitution, to permit a substitute item.

On the Non-Stock Components tab, add labor, service or packaging charges. Two rules apply: a component whose base UOM is not divisible must have a whole-number quantity, or the specification cannot be saved, and a non-stock kit cannot include lot- or serial-tracked items whose class uses the When Used assignment method or the User-Enterable issue method.

Step 6: Set the cost basis for non-stock kits

On Sales Orders Preferences (SO101000), choose how non-stock kits are costed: Stock Component Cost, Non-Stock Kit Standard Cost, or Non-Stock Kit Standard Cost Plus Stock Component Cost. Acumatica recommends the first when a kit has few non-stock components and the second when it has few stock components. When the invoice releases, the system generates an inventory issue that debits the cost of goods sold accounts of the stock components.

Step 7: Assemble stock kits

A stock kit must be assembled before it can be added to a sales order. Open Kit Assembly (IN307000), add a record and set Type to Assembly. Confirm Date and Post Period, select the kit and Revision (the components fill in), then the Warehouse and Quantity. Save, click Release and check the Financial tab for the GL batch.

On release, component quantities fall and the kit’s on-hand quantity rises. Standard costs of non-stock components post to the expense accrual account set by each component’s posting class on Posting Classes (IN206000).

Step 8: Disassemble stock kits

You can disassemble a stock kit at any time, for example when its expiration date is near. On Kit Assembly (IN307000), set Type to Disassembly, select the kit, revision, reason code, warehouse and quantity, then save and release. Components return to their original warehouse locations.

Disassembly uses the revision the kit was built with, and quantities are estimated from each disassembly coefficient. Acumatica says those quantities “are not validated in any way,” so review each document before release.

Step 9: Price the kit and manage revisions

Set a default price on the kit item, or use Sales Price Worksheets (AR202010) when you have more than ten kits, as Acumatica suggests. To change a stock kit, add a new revision rather than editing the active one. Non-stock kits have only one revision.

How Acumatica costs an assembled stock kit

Except under Standard costing, a kit’s cost is its stock component costs at release, plus components added during assembly, plus labor and service components at their rates. The kit’s valuation method decides how that cost enters cost layers.

Kit valuation method What happens on assembly
Average Updates or creates the cost layer in the assembly warehouse
FIFO Always creates a new cost layer
Specific, lot-tracked Updates or creates the layer for that lot
Specific, serial-tracked Creates a new cost layer for each kit
Standard Uses the kit’s standard cost; the difference posts to the Standard Cost Variance account

Illustration (constructed figures): a gift kit uses a $6.00 candle, a $4.50 mug and 0.1 labor hours at $30.00. Under Average or FIFO, each assembled kit costs $13.50. With a $13.00 standard cost, each kit enters stock at $13.00 and $0.50 posts to standard cost variance.

Common mistakes and how to fix them

  • A stock kit cannot be added to a sales order. It has not been assembled. Release a kit assembly first, or use a non-stock kit if you never pre-build.
  • A disassembly has no reason code. Every disassembly needs one, and an assembly needs one when a component line exceeds on-hand quantity. Complete Step 2 so the default fills in.
  • Non-stock kit components missing from the pick list. In a 2022 community case the poster said this was most likely caused by a customization, so check UOM conversions and customizations first.
  • Component counts drift after disassembly. Require a second review of disassembly documents and set coefficients below 1 for items that cannot be reused.
  • Purchasing cannot see kit demand. Since 2024 R1, planning creates component demand as Planned Kit Assembly Demand when MRP or DRP is enabled, the kit uses the Kit Assembly source and its revision is active.

Limitations of native Acumatica kitting

  • Stock kits must be assembled before sale, and the kit documentation describes no action that creates an assembly from a sales order line. Partner SWK Technologies documents building a customization to do that.
  • Non-stock kits have one revision, Standard valuation only and no availability of their own.
  • Stock kits are returned only as whole kits.
  • The Kit Assembly form has no routing, work center, scheduling or work-in-process tracking.

When companies add a third-party kitting tool

Add-ons appear when sales staff need to configure kits at order entry or build kits automatically from orders. Crestwood’s Auto Kitting creates kits from rules when sales orders are entered. Kensium’s Customizable Kits lets customers choose component quantities within limits and prices the kit from the selected components. Neither publishes pricing, and each sells the product it describes.

Acumatica tested Advanced Kitting in its Labs program, adding component availability, cost and margin at order entry. On February 9, 2026 an Acumatica product manager wrote that it would not ship in 2026 R1 and that the team planned to start “introducing this functionality into the core product later this year.” Ask your partner whether it has reached your release before buying an add-on.

When to move to Manufacturing Edition

Kit assembly treats a build as one inventory transaction. Manufacturing Edition adds multi-level bills of material, routings with material and labor operations, overhead by fixed rate, labor hour or quantity completed, phantom items, backflushing and production orders, according to Acumatica’s BOM and Routing datasheet and manufacturing documentation. Our bill of materials template shows the fields a production BOM carries beyond a kit specification.

Consider the move when builds take several steps or days, when you must schedule people or machines, when you apply overhead, when kits contain built sub-assemblies, or when each customer order must be tracked as a job. Otherwise, kit assembly is simpler and avoids Manufacturing Edition’s higher subscription.

How we researched this

We read the pages that rank for Acumatica kitting, mostly partner blogs and add-on product pages, and found none that covers stock and non-stock costing, reason codes, disassembly limits and planning together. We then read the MYOB Acumatica kit documentation and Acumatica’s datasheets, release notes and community posts on November 8, 2026.

Related guides

Frequently asked questions

What is the difference between a stock kit and a non-stock kit in Acumatica?

A stock kit is assembled in advance and carried in inventory with its own quantity and cost. A non-stock kit is never assembled; it sells as one line and its stock components are relieved when the order ships.

Do I need Manufacturing Edition to use kits in Acumatica?

No. Kits run on the Kit Assembly feature, which Acumatica lists among Distribution Edition’s inventory features. Manufacturing Edition is needed only for multi-level BOMs, routings and production orders.

Can I sell a stock kit before it is assembled?

No. Acumatica requires assembly on the Kit Assembly (IN307000) form first. To sell without building, use a non-stock kit or an add-on that creates assemblies from orders.

Does Acumatica MRP plan for kit components?

Yes, from 2024 R1. With MRP or DRP enabled, planning creates component demand for stock kits and for non-stock kits on sales orders or forecasts, and you can create kit assemblies from the planning display.

Sources

  • MYOB Acumatica User Guide, Inventory Item Kits, no date shown, accessed November 8, 2026. help.myob.com.au
  • MYOB Acumatica User Guide, Stock Kits, no date shown, accessed November 8, 2026. help.myob.com.au
  • MYOB Acumatica User Guide, Non-Stock Kits, no date shown, accessed November 8, 2026. help.myob.com.au
  • MYOB Acumatica User Guide, Kit Specifications (IN209500), no date shown, accessed November 8, 2026. help.myob.com.au
  • MYOB Acumatica User Guide, To Create a Stock Kit, no date shown, accessed November 8, 2026. help.myob.com.au
  • MYOB Acumatica User Guide, To Create a Specification for a Stock Kit, no date shown, accessed November 8, 2026. help.myob.com.au
  • MYOB Acumatica User Guide, To Create a Specification for a Non-Stock Kit, no date shown, accessed November 8, 2026. help.myob.com.au
  • MYOB Acumatica User Guide, To Assemble a Stock Kit, no date shown, accessed November 8, 2026. help.myob.com.au
  • MYOB Acumatica User Guide, To Disassemble a Stock Kit, no date shown, accessed November 8, 2026. help.myob.com.au
  • MYOB Acumatica Release Notes 2024 R1, Manufacturing: Kit Components Included in Inventory Planning, no date shown, accessed November 8, 2026. help.myob.com.au
  • MYOB Acumatica User Guide, Bills of Material: Key Features, no date shown, accessed November 8, 2026. help.myob.com.au
  • Acumatica, Distribution Edition datasheet, version 20250923 (vendor). acumatica.com
  • Acumatica, Bill of Material and Routing datasheet, version 20241009 (vendor). acumatica.com
  • Acumatica Community, Acumatica Labs Program: Advanced Kitting, October 17, 2024, with update February 9, 2026. community.acumatica.com
  • Acumatica Community, Non-stock kits don’t allocate components until the shipped qty is manually updated on shipment, September 16, 2022. community.acumatica.com
  • SWK Technologies (Acumatica partner), How to Create a Kit Assembly from a Sales Order in Acumatica, September 14, 2022, updated November 7, 2023. swktech.com
  • Crestwood (sells the add-on), Auto Kitting for Acumatica, January 25, 2025, updated April 23, 2025. crestwood.com
  • Kensium (sells the add-on), Customizable Kits, no date shown, accessed November 8, 2026. kensium.com

Sherman Hsieh

CEO & Editor-in-Chief, Business-Software.com
Independent analysis of enterprise software — ERP, CRM and more
Sherman Hsieh is the founder, CEO, and editor-in-chief of Business-Software.com. He leads the site's independent, buyer-focused coverage of ERP, CRM, and other business systems, including vendor-neutral comparisons, pricing analysis, and implementation guidance. Before founding Business-Software.com, Sherman was an executive at Siebel ...