Browse Business Software Categories

Close  

Distribution

ERP

Supply Chain Collaboration

Supply Chain Management

EDI 855 Purchase Order Acknowledgment: Accept, Change and Reject Codes Suppliers Must Get Right

EDI 855 Purchase Order Acknowledgment: Accept, Change and Reject Codes Suppliers Must Get Right

Last updated: October 11, 2026 · Independent guide · We do not sell rankings or coverage.

An EDI 855 is the purchase order acknowledgment you send back after a customer’s 850 purchase order, telling the buyer whether you accept the order as written, accept it with changes, or reject it. The header BAK segment gives the overall answer with an acknowledgment type code such as AD, AC, AK or RJ, and each ACK segment gives a line status such as IA (accepted), IB (backordered), IQ (quantity changed) or IR (rejected). The obligation comes from each trading partner’s EDI guide, not from law, and published guides set deadlines from 60 minutes to 48 hours after the PO arrives.

The rule in brief

  • Who it applies to: suppliers whose customer’s EDI implementation guide lists the 855 as required. It is a trading partner rule, not a regulation.
  • What you send: one 855 per 850, with a BAK02 acknowledgment type for the whole PO and, in detail acknowledgments, an ACK status for every line.
  • Deadlines in published guides: 60 minutes to 48 hours after the PO arrives in the guides we reviewed (table below).
  • Official source: X12 elements 587 and 668, overridden by your partner’s own 855 guide.
  • Date checked: October 11, 2026.

What the 855 requires in detail

The BAK segment carries the purpose code (BAK01, usually 00 for original), the acknowledgment type (BAK02), the buyer’s PO number (BAK03) and PO date (BAK04) (Stedi X12 4010 BAK reference, no date shown). Each line repeats the PO1 data and then adds one or more ACK segments with a status code, a quantity, a unit of measure and, where needed, a date qualifier and date (Stedi X12 4010 ACK reference, no date shown). Stedi sells EDI software; its reference pages reproduce the X12 definitions.

The 855 is sent in addition to the 997 functional acknowledgment, not instead of it (Cleo, an EDI vendor, no date shown). The 997 says a valid file arrived; the 855 says what you will ship. Our guide to the EDI 850 purchase order covers how the inbound order becomes a sales order before you acknowledge it.

BAK02 acknowledgment type codes

X12 defines 15 acknowledgment type codes in element 587 (Stedi, element 587, no date shown).

Code X12 meaning When suppliers use it
AD Acknowledge, with detail, no change Every line accepted exactly as ordered, with line detail sent
AC Acknowledge, with detail and change Any line backordered, changed in price, quantity or date, or rejected
AK Acknowledge, no detail or change Header-only acceptance of the whole PO, where the partner allows it
RJ Rejected, no detail The entire PO is declined
RD Reject with detail The entire PO is declined, with line statuses explaining why

Partners narrow this list. Belk accepts AD or AK for an unchanged PO, AC or AE for a changed one, and RJ with BAK01 code 01 for a cancellation (Belk 855 guide, September 11, 2002). D&H Distributing allows AC, AD and RD (D&H 855 implementation guide, version 2.0, February 10, 2020). 3M allows only AC, even when nothing changed (3M-IB855 guide, May 16, 2018). Map BAK02 per partner, not globally.

ACK01 line item status codes

Element 668 has 26 line status codes (Stedi, element 668, no date shown).

Code X12 meaning Sales order condition that should produce it
IA Item accepted Quantity, price and date match the PO and stock is allocated
IB Item backordered Some or all of the quantity will ship later
IQ Item accepted, quantity changed You will ship a different quantity, for example rounded to case pack
IP Item accepted, price changed Your price differs from the PO price
DR Item accepted, date rescheduled You will ship on a date other than the one requested
IR Item rejected The line will not ship at all
R2 Item rejected, invalid item product number The buyer’s item or UPC does not match any of your items

A single PO line can carry more than one ACK. D&H requires “multiple ACK loops” for split dispositions, one per status and quantity pair, and says the ACK02 quantities in a PO1 loop should always add up to the PO102 ordered quantity (D&H, February 10, 2020). Walmart’s drop ship vendor 855 adds AR (accepted and released for shipment) and requires IA to precede AR (Walmart Developer, 855 for drop ship vendors, last modified April 12, 2026).

Worked examples: backorder, price change and full rejection

Illustration: the PO, items, prices and dates below are constructed. Segment layouts follow the guides cited, and your partner’s guide may differ.

The PO is 4500012345, dated October 12, 2026, for one distribution center. Line 1 is 120 cases of a stainless water bottle at $18.00 per case. Line 2 is 60 cases of a lunch box at $9.50 per case.

Example 1: a partly backordered line

You have 72 cases of the water bottle and expect the rest on November 16. Line 2 ships complete. Because one line changed, BAK02 is AC, and line 1 carries two ACK loops, each followed by a DTM with qualifier 068 (current schedule ship). D&H uses this pattern for multiple expected ship dates on one line.

BAK*00*AC*4500012345*20261012****SO-88412*20261012~
PO1*1*120*CA*18.00**UP*012345678905~
ACK*IA*72*CA~
DTM*068*20261102~
ACK*IB*48*CA~
DTM*068*20261116~
PO1*2*60*CA*9.50**UP*012345678912~
ACK*IA*60*CA~
DTM*068*20261102~

The ACK quantities on line 1 add to 120, matching PO102. SPS Commerce’s Fulfillment help says to mark a line as backordered “if your retailer allows it,” and for out-of-stock items it describes sending the line as rejected with the quantity you can ship (SPS Commerce Fulfillment help, August 7, 2026).

Example 2: a price change

The PO shows $9.50 for the lunch box, but your contract price rose to $9.95 on October 1. You accept the quantity and flag the price. Guides disagree on where the new price goes. A generic 005010 implementation guide hosted by TrueCommerce says “If ACK01 = IP, PO104 should be new price” (855 implementation guide hosted by TrueCommerce, revision 001, April 11, 2024). 3M instead uses CTP03 to “change or confirm price sent on PO” (3M, May 16, 2018).

BAK*00*AC*4500012345*20261012****SO-88412*20261012~
PO1*1*120*CA*18.00**UP*012345678905~
ACK*IA*120*CA~
PO1*2*60*CA*9.95**UP*012345678912~
ACK*IP*60*CA~

An IP code flags a disagreement; it does not oblige the buyer to pay. Agree the price before you invoice, because your EDI 810 invoice is usually checked against the PO price, and a mismatch leads to a short payment.

Example 3: a full rejection

The PO ships to a distribution center your account is not set up to serve, and the buyer has agreed you should decline. A header-only rejection uses RJ with no line detail. The TrueCommerce-hosted guide requires a reason note in an N9 segment with N901 L1 and an MTX message whenever BAK02 is RD or RJ (TrueCommerce-hosted guide, April 11, 2024).

BAK*00*RJ*4500012345*20261012~
N9*L1*GEN~
MTX**SHIP-TO DC 6094 NOT ON VENDOR SETUP~

Some partners handle changes outside the 855 entirely. Gentex tells suppliers to call the planner for quantity changes rather than resend an 855 (Gentex 855 specification, version 1.9, last updated August 5, 2013). Where your partner’s guide does not list RJ or RD, contact the buyer and ask for an 860 change or cancellation instead.

Who is exempt and when you do not need an 855

X12 defines the 855 but does not require anyone to send it. You owe one only when your customer’s implementation guide or vendor agreement asks for it, and some programs take confirmation in a web portal instead. Amazon vendors, for example, can confirm POs in Vendor Central or by EDI 855, according to Flywheel, an Amazon marketing agency (Flywheel, April 1, 2025).

Not needing an 855 never exempts you from the 997. Record per partner whether the 855 is mandatory, optional or not used.

Deadlines and penalties

Trading partner Published 855 rule Source
Dot Foods (redistributor) Initial 855 within 24 hours of receiving the PO; updated 855s up to shipment if anything changes Dot Foods supplier 855, no date shown
3M (as buyer) First 855 within 48 hours of PO receipt 3M, May 16, 2018
Gentex (as buyer) 12 hours for North American suppliers, 60 minutes for short lead time suppliers Gentex, August 5, 2013
General practice “Often” within 24 to 48 hours SPS Commerce, last modified December 6, 2024

We found no public fee schedule for a missing 855 at a US store chain. The clearest published example is Amazon’s vendor program. Flywheel reports that Amazon charges 10% of product cost for unconfirmed PO units, 3% of cost on confirmed units that are down-confirmed more than five days into the ship or delivery window, and 10% on confirmed units that are canceled unfilled, with the on-time charges applying when a vendor’s trailing four-week on-time rate falls below 90% (Flywheel, April 1, 2025). Confirm current terms in Vendor Central.

A wrong 855 can cost as much as a late one. If you accept a quantity you cannot ship, the shortage surfaces later as a fill rate or on-time in-full charge. TrueCommerce warns that chargebacks may apply when an automatically sent 855 needed changes before it went out (TrueCommerce help, revised October 2, 2026). Our guide to retail chargebacks and supplier software lists published fill rate and on-time charges by retailer.

Records you should keep

No regulation sets a retention period for 855s, but your evidence in a dispute is what you sent and when. Keep these at least as long as your longest customer dispute window:

  • The inbound 850 and any 860 changes, with receipt timestamps.
  • Each outbound 855, including revised versions, with send timestamps.
  • The buyer’s 997 for each 855, which proves receipt.
  • The sales order change history showing who changed a quantity, price or date and why.
  • Buyer emails or portal messages agreeing to a price change, backorder or rejection.

The quantity you ship on the EDI 856 advance ship notice should match what you acknowledged, or you need a revised 855 first.

What to set up in your systems

Generate the 855 from the sales order after someone has decided what you can ship, not from the 850. Each sales order line needs a status field the 855 map can read, plus the confirmed quantity, price and ship date.

SPS Commerce Fulfillment. In the portal, you open the PO, click New under Acknowledgement and complete the required fields. Quick Send is meant only for partners where Auto Sourcing fills every mandatory field. Common rejections include missing line acknowledgements and buyer part numbers that differ from the PO, and an 855 does not remove lines from a related ASN (SPS Commerce Fulfillment help, August 7, 2026). For NetSuite, SPS describes “SPS Commerce Fulfillment for NetSuite” as a Built for NetSuite SuiteApp that supports order acknowledgment (SPS Commerce, last updated March 9, 2020). SPS’s NetSuite integration page lists no prices and directs visitors to contact sales (SPS Commerce NetSuite page, last modified May 6, 2026).

SPS Commerce EDI for Acumatica. The 855 arrived in version 6 in January 2020 with support for common status codes. In version 18, released October 2024, the outbound 855 line total started using the sales order line extended price rather than the line amount, and SPS support will work with you on a new map if you want to keep sending the line amount (SPS Commerce release notes, last modified May 18, 2026). Check this before sending price changes, because discounts can make the line total differ from the PO.

TrueCommerce. With Acumatica, the 855 is generated when the reviewed sales order is imported from Acumatica back into Transaction Manager, so it carries the order desk’s adjustments (TrueCommerce, April 30, 2024). With NetSuite, TrueCommerce pulls allocated sales orders to build the 855 (TrueCommerce, May 14, 2024). Transaction Manager can also create and send the 855 automatically on PO receipt (TrueCommerce Transaction Manager guide, no date shown), but TrueCommerce recommends that only if you always accept and fully fulfill the partner’s orders (TrueCommerce help, October 2, 2026). We found no published TrueCommerce pricing.

NetSuite with other connectors. Orderful, another EDI vendor, adds a Generate 855 button in NetSuite (Orderful docs, acknowledging orders, last modified January 29, 2026), reads a status field on each sales order line and derives the header type from those statuses (Orderful docs, 855 mapping, last modified January 29, 2026). If nobody sets the line status, no connector can tell a backorder from an acceptance.

Whichever provider you use, three settings prevent most errors. Base the confirmed date on allocation or available-to-promise, not the date on the 850. Block the 855 until every line has a status. Trigger a revised 855 when a sales order line changes before shipment, for partners such as Dot Foods that require updates.

How we researched this

We read the five highest-ranking pages for “edi 855” on October 11, 2026, from SPS Commerce, TrueCommerce, Cleo, Orderful and BOLD VAN. All are EDI vendors, and none combined code definitions, published deadlines, worked segments, fines and ERP setup. We then checked the X12 code lists through Stedi’s reference, read 855 implementation guides published by Walmart, Dot Foods, Belk, D&H, 3M and Gentex, and read vendor documentation from SPS Commerce, TrueCommerce and Orderful. We did not test any product.

Related guides

Frequently asked questions

What is the difference between an EDI 855 and a 997?

A 997 confirms that your translator received a file that passed syntax checks. An 855 tells the buyer what you will actually ship, line by line, including backorders, price changes and rejections.

How fast do I have to send an 855?

It depends on the trading partner. Dot Foods asks for 24 hours, 3M for 48 hours and Gentex for 12 hours for North American suppliers. SPS Commerce says 24 to 48 hours is common, but your partner’s guide is the rule that applies to you.

Can I reject a whole purchase order with an 855?

X12 provides RJ (rejected, no detail) and RD (reject with detail) for that purpose. Some partners do not list them; 3M, for example, allows only AC. In that case, contact the buyer and ask for an 860 cancellation. Check whether your partner’s 855 guide lists RJ or RD before sending one.

Do I send a new 855 if the order changes after I acknowledge it?

Some partners require it. Dot Foods asks for updated 855s up to the point of shipment, while Gentex tells suppliers not to resend a change to an earlier 855. When the buyer sends an 860 change, update the sales order first and follow the partner’s guide on whether to acknowledge the change.

Sources

Sherman Hsieh

CEO & Editor-in-Chief, Business-Software.com
Independent analysis of enterprise software — ERP, CRM and more
Sherman Hsieh is the founder, CEO, and editor-in-chief of Business-Software.com. He leads the site's independent, buyer-focused coverage of ERP, CRM, and other business systems, including vendor-neutral comparisons, pricing analysis, and implementation guidance. Before founding Business-Software.com, Sherman was an executive at Siebel ...